Sterlco SEU Series Economical Water TCU - Manual (Page 9)

WTR1-600 Chapter 1: Safety 9 of 42
1-2 Warnings and precautions
Our units are designed to provide safe and reliable operation when installed and operated
within design specifications, following national and local safety codes.
To avoid possible personal injury or equipment damage when installing, operating, or
maintaining this granulator, use good judgment and follow these safe practices:
þ Follow all SAFETY CODES.
þ Only PROPERLY TRAINED personnel familiar with the information within this
manual should work on this equipment.
þ TrueTemp Mini Series cabinets and piping are hot and are a BURN HAZARD.
þ Wear SAFETY GLASSES and WORK GLOVES.
þ Disconnect and/or lock out power before servicing or maintaining the hot oil
temperature control unit.
þ Use care when LOADING, UNLOADING, RIGGING, or MOVING this
equipment.
þ Operate this equipment within design specifications.
þ OPEN, TAG, and LOCK ALL DISCONNECTS before working on equipment.
You should remove the fuses and carry them with you.
þ Make sure the temperature control unit and components are properly GROUNDED
before you switch on power.
þ When welding or brazing in or around this equipment, be sure VENTILATION is
ADEQUATE. PROTECT adjacent materials from flame or sparks by shielding with
sheet metal. An approved FIRE EXTINGUISHER should be close at hand and
ready for use if needed.
þ Do not jump or bypass any electrical safety control.
þ Do not restore power until you remove all tools, test equipment, etc., and the hot oil
temperature control unit and related equipment are fully reassembled.
þ Do not restore power until all tools, test equipment, etc. have been removed and the
panels replaced.
þ Only PROPERLY TRAINED personnel familiar with the information in this
manual should work on this equipment.
We have long recognized the importance of safety and have designed and manufactured our
equipment with operator safety as a prime consideration. We expect you, as a user, to abide
by the foregoing recommendations in order to make operator safety a reality.