ScyTek Electronics Galaxy 5000RS-DBP - Manual (Page 36)

Page 32 - Galaxy 5000RS-DBP
Entering System Programming
This system is compatible with both the LCD two way transmitter or the standard transmitter, all system
programming can be performed using either one.
To enter System Programming:
1. Turn the ignition switch to the ON position.
2. Within 5 seconds, press the valet switch 5 times.
· The siren/horn will provide three chirps/honks, indicating that you have entered Programming.
3. Press the valet switch the number times equal to the System Parameter you want to change.
· The siren/horn will chirp/honk each time the valet switch is pressed.
4. Within 5 seconds, press the transmitter button corresponding to the desired operating mode for
that System Parameter.
· The siren/horn will chirp/honk to indicate the setting.
1 chirp/honk = Button 1
2 chirps/honks = Button 2
3 chirps/honks = Button 3
5. When you are finished, turn off the ignition to save the changes.
Default Reset
Following this procedure will set all System Programming Parameters to factory default settings.
1. Enter System Programming.
2. Press Transmitter Button 3.
· The siren/horn will chirp/honk 6 times indicating that the reset signal was received.
· All System Programming parameters are now set to factory default settings.
· The Valet Mode is off.
3. Turn off ignition.
Programmable System Options
The following is a description of the programming options of the system. Some of the program branches
control more than one option, and may require accessing a particular branch number twice in order to
program all desired features.
1. Arm Mode. Selects between Manual and Passive Arming.
2. Auto Rearming Mode. When selected, the system will automatically re-arm 30 seconds after it is
disarmed .
3. Arming Chirps. Selects between normal and silent operation.
4. Ignition Door Locking / Override Code Set. This dual program branch selects Ignition Door
Locking, and programs the optional Emergency Override Code.
Ignition Door Locking. Selects whether or not the system will automatically lock the doors 10 seconds
after the ignition key is turned on.
Override Code Set. Changes the Emergency Override Code for a higher level of security.
5. Ignition Door Unlocking. Selects whether or not the system automatically unlocks the doors when
System Programming