Alpine TDM-7582 - Manual (Page 11)

9
-EN
Fast Forward and Rewind
1
Press the g DN or f UP button during
tape play to fast rewind or forward the tape
respectively.
The tape side indicator
or blinks indicating
the direction of the tape. When the end of the
tape is reached in the fast rewind mode, the
player stops automatically and begins playing
from the beginning of the same side.
When the end of the tape is reached in the fast
forward mode, the player stops automatically and
begins playing from the beginning of the
opposite side.
2
Press the f UP button during forwarding to
stop fast forwarding and resume tape play.
Press the g DN button during rewinding to
stop rewinding and resume tape play.
The tape side indicator stops blinking.
Blank Skip (B.SKIP)
1
Press the B.SKIP button during tape play to skip
over blank portions of the tape lasting 15
seconds or longer, "B.SKIP" appears on the
display.
Press the B.SKIP button to cancel the blank skip
mode.
"B.SKIP" disappears from the display.
Manual Reverse
1
Press the PROG button during tape play to
change the direction of play.
The tape side indicators (
and ) change to
show which side of the cassette is being played.
Program Sensor (P.S.)
1
Press the P.S. DN button once during tape play
to return to the beginning of the current selection
being played.
If you wish to return to the beginning of a
selection further back, press repeatedly until the
number of selections you would like to skip is
shown in the display.
The display will show PS-1 with the first press
and will increase by one with each successive
press up to PS-9. The tape indicator will blink
showing the direction of your search.
Press the P.S. UP button once during tape play
to advance to the beginning of the next selection.
If you wish to advance to the beginning of a
selection further ahead, press repeatedly until
the number of selections you would like to skip is
shown in the display.
The display will show PS+1 with the first press
and will increase by one with each successive
press up to PS+9. The tape indicator will blink
showing the direction of your search during
searching operation.
NOTES
• The program sensor feature is functional in the tape
play mode only.
• You can advance to the 9th (max.) program or return
to the 8th (max.) program.