JJC RM-E7 User Manual

Page 2

1. The remote control is powered by a three-volt CR2032 lithium battery which is

already included in.

2. After sliding the latch in the direction showing how to unlatch the battery holder,

remove the holder.

3. Remove the battery from the battery holder.

4. Insert a fresh battery with the face marked "+" on top.

5. Slide the battery holder into the remote until the latch clicks into place.

z Specification

• 100% compatible with Pentax Remote E infrared remote controls.
• Works with all remote shutter release control modes (Quick-response, W/T

Zoom).

• Easy-to-replace CR2025 lithium battery.
• Operating temperature: 5 °C to 40 °C (40 °F to 105 °F).
• Typical Battery Life: up to 3 years, 20,000 exposures.

z Care and Storage

1. When the remote control is not in used for an extend period of time, please

remove the battery from the remote control.

2. Do not leave the remote control in any places exposed to excessive heat, humidity

3. Do not leave remote control on or near a television, refrigerator, or other appliance

with a magnetic field.

4. If the remote control gets wet, wipe it with a dry towel as soon as possible.

5. Do not use organic solvents, such as alcohol or paint thinner when cleaning the

remote control.

Compatible with Pentax Cameras

K110D

K100D

K10D

*ist DL

K20D

K200D

K2000

K-x

Digital

SLR

*ist DS

*ist D

*istDS2

*istDL2

S4i

S5i

S5n

430

450

550

750z

S50

Optio

S40

330

A10

A20

A30

Film SLR

*ist

MZ6

MZ-L

ZX-L

Compatible with Samsung Cameras

Digital SLR

GX-1L

GX-1S

GX-10

GX-20