JJC RM-E8 User Manual

Jjc rm-e8

JJC RM-E8

Long Range Infrared Remote Control Instruction

Thank you for purchasing JJC RM-E8 long range Infrared Remote Control. For the best performance,

please read this instruction carefully before use.

z To use RM-E8 Remote Control
1. For the first time use, please pull out the plastic separator (if your remote control has it) at the battery

holder.

2. Mount the camera on a tripod (recommended) or place the camera on a stable, level surface.

3. Press the button and rotate main command dial until (delayed remote) or (quick response

remote) is displayed in the control panel.

4. Aim the transmitter on the remote control at the infrared receiver on the camera (usually within +/- 40

degree of the lens axis, from the left to the right and from the top to the bottom) and press the

shutter-release button on the remote control (when using the remote outdoors, make sure that the

subject is not

backlit and that the line of site between the transmitter and the infrared receiver is not

blocked by the lens or other obstacles).

5. How the camera focuses and shoots depends on the option selected for your camera's custom setting.

For further information, check your camera's manual.

6. Infrared cannot be seen by human eyes. So you will see no visible light from the LED on the front end

of the remote control when operating.

For further information, check your camera's manual.