JJC RM-S2 - Manual (Page 2)

� � � � To To To To use use use use RM- RM- RM- RM-S2 S2 S2 S2 Remote Remote Remote Remote Control Control Control Control to to to to take take take take photo photo photo photo
1. Mount the camera on a tripod (recommended) or place the camera on a stable, level surface.
2. Aim the transmitter on the remote control at the infrared receiver on the camera (usually within
+/- 20 degree of the lens axis, from the left to the right and from the top to the bottom) and
press the shutter-release button on the remote control (when using the remote outdoors,
make sure that the subject is not backlit and that the line of site between the transmitter and
the infrared receiver is not blocked by the lens or other obstacles).
3. How the camera focuses and shoots depends on the option selected for your camera's
custom setting. For further information, check your camera's manual.
4. Infrared cannot be seen by human eyes. So you will see no visible light from the LED on the
front end of the remote control when operating.
� � � � To To To To use use use use RM- RM- RM- RM-S2 S2 S2 S2 Remote Remote Remote Remote Control Control Control Control with with with with TV TV TV TV
Connect your FUJIFILM FinePix S2000HD to a TV using the A/V cable to enjoy images that you
have take in high definition. You can also use the wireless remote control to comfortably control the
camera from a remote position.
Connecting Connecting Connecting Connecting the the the the camera camera camera camera
1. Turn the camera's power OFF
2. Open the camera's terminal cover and connect the A/V cable into A/V OUT. Insert the other
end of the cable into the TV A/V input.
* A/V cable is a supplied accessory of S2000HD camera.
Operating Operating Operating Operating the the the the Wireless Wireless Wireless Wireless Remote Remote Remote Remote Control Control Control Control
1. Aim the transmitter on the wireless remote control at the receiver on the front of the camera.
2. Excluding the shutter button, the remote control's operational buttons perform the same
actions as those on the FUJIFILM FinePix S2000HD.
3. There is no function for pressing the shutter button half-way down. An image is taken by
pushing the shutter button down completely.
� � � � Specification Specification Specification Specification
• Battery Type: 1X CR-2025
• Operating temperature: 5 °C to 40 °C (40 °F to 105 °F).
• Operation distance: 1cm-15meters.
• Weight: 11 g
• Size: 56 X 34 X 6 mm
• RM-S2 replaces FUJIFILM RC-S2 wireless remote control.
• RM-S2 compatibles with FUJIFILM PINEPIX S2000HD.
Copyright Copyright Copyright Copyright of of of of JJC Technology Technology Technology Technology
WWW.JJC.CC WWW.JJC.CC WWW.JJC.CC WWW.JJC.CC