JJC RM-E6 User Manual

Page 2

1. The remote control is powered by a three-volt CR2032 lithium battery which is already

included in.

2. After sliding the latch in the direction showing how to unlatch the battery holder, remove

the holder.

3. Remove the battery from the battery holder.

4. Insert a fresh battery with the face marked "+" on top.

5. Slide the battery holder into the remote until the latch clicks into place.

z Specification

• 100% compatible with Pentax Remote E infrared remote controls.
• Works with all remote shutter release control modes (Quick-response, W/T Zoom).
• Easy-to-replace CR2025 lithium battery.
• Operating temperature: 5 °C to 40 °C (40 °F to 105 °F).
• Typical Battery Life: up to 3 years, 20,000 exposures.

z Care and Storage

1. When the remote control is not in used for an extend period of time, please remove

the battery from the remote control.

2. Do not leave the remote control in any places exposed to excessive heat, humidity

3. Do not leave remote control on or near a television, refrigerator, or other appliance

with a magnetic field.

4. If the remote control gets wet, wipe it with a dry towel as soon as possible.

5. Do not use organic solvents, such as alcohol or paint thinner when cleaning the

remote control.

z Canon DSLR/SLR part compatible with Canon Cameras

300D

350D

400D

450D

500D

REBEL XSI

KISS X2

Digital Rebel

Digital Rebel XT Rebel T1i

Digital SLR

5D Mark II

EOS 7D

550D

Rebel T2i

ELAN 7

100

300v

300x

3000v QD

Film SLR

Rebel K2

Rebel T1 Date

Rebel T2 Date

Kiss III

Kiss III L

APS SLR

EOS IX

SureShot

(Prima Super)

Z180u

Z155

120

ELPH

370Z

z Canon DC part compatible with Canon Cameras

Pro 1

S1 IS

S70*

Power Shot

S60*

Pro 90 IS

*Only work with shutter function.