Configure ip node name, Configure sip signaling – Avaya POLYCOM 8400-SES User Manual
Page 9

CRK; Reviewed: 
SPOC 7/1/2011 
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
9 of 21
Polycom8400-SES
change ip-network-region 1 Page 1 of 19 
 IP NETWORK REGION 
 Region: 1 
Location: Authoritative Domain: avaya.com 
 Name: 
MEDIA PARAMETERS Intra-region IP-IP Direct Audio: yes 
 Codec Set: 1 Inter-region IP-IP Direct Audio: yes 
 UDP Port Min: 2048 IP Audio Hairpinning? n 
 UDP Port Max: 3029 
DIFFSERV/TOS PARAMETERS RTCP Reporting Enabled? y 
 Call Control PHB Value: 46 RTCP MONITOR SERVER PARAMETERS 
 Audio PHB Value: 46 Use Default Server Parameters? y 
 Video PHB Value: 26 
802.1P/Q PARAMETERS 
 Call Control 802.1p Priority: 6 
 Audio 802.1p Priority: 6 
 Video 802.1p Priority: 5 AUDIO RESOURCE RESERVATION PARAMETERS 
H.323 IP ENDPOINTS RSVP Enabled? n 
 H.323 Link Bounce Recovery? y 
 Idle Traffic Interval (sec): 20 
 Keep-Alive Interval (sec): 5 
 Keep-Alive Count: 5 
5.4. Configure IP Node Name
This section describes the steps for setting IP node name for SIP Enablement Services in 
Communication Manager. Enter the change node-names ip command, and add a node name for 
SIP Enablement Services along with its IP address. 
 
change node-names ip Page 1 of 2 
 IP NODE NAMES 
 Name IP Address 
ASM 10.64.40.42 
CLAN 10.64.40.24 
CLAN-AES 10.64.40.25 
G450 10.64.41.21 
MEDPRO 10.64.40.26 
MM-MAS 10.64.20.63 
S8300 10.64.42.21 
SES 10.64.40.41
5.5. Configure SIP Signaling
This section describes the steps for administering a signaling group in Communication Manager 
for communication between Communication Manager and SIP Enablement Services. Enter the 
add signaling-group  command, where s is an available signaling group and configure the 
following: 
 Group Type – Set to sip.
 Near-end Node Name - Set to CLAN as displayed in Section 5.4.
 Far-end Node Name - Set to the SIP Enablement Services name configured in Section
5.4.
 Far-end Network Region - Set to the region configured in Section 5.3. 
 Far-end Domain - Set to avaya.com. This should match the SIP Domain value in 
Section 6.1.
