MadgeTech RFPRHTemp2000A Wireless Pressure, Humidity and Temperature Data Logger - Manual (Page 4)

Product User Guide
Product Overview
The RFPRHTemp2000A is a wireless data logger that measures and records ambient
pressure, humidity and temperature. This dynamic data logger is ideal for monitoring
weather data, measuring barometric pressure in high-rise buildings or monitoring
storage or warehouse environments that contain sensitive material. Clinical laboratories
and clean rooms can utilize the RFPRHTemp2000A to measure and maintain critical
pressure, humidity or temperature levels, all with one device.
The RFPRHTemp2000A features an LCD screen which provides instant access to the
current reading, minimum, maximum and average statistics. Statistics can be reset
directly on the keypad of the device, allowing customers to keep track of statistics
over certain time periods. This feature does not erase the data recorded, and resets the
statistics count. Other features include configurable alarms, battery life indicator and
wall or surface mounting options.
This data logger allows users to select the desired units in which the data is displayed.
The RFPRHTemp2000A has a wide range of units available for each channel: °C, °F, °R,
K for the temperature channel, %RH, mg/mL, Dew Point for the humidity channel and
mbar, PSI, inHg, mmHg, atm, Torr, Pa, m, kPa, MPa for the pressure channel. The unit is
available for display on the LCD screen as well as in the software.
Selection Buttons
The logger is designed with 3 direct selection buttons: Scroll, Units and Wireless.
• Scroll: Allows user to scroll through current readings, average stats and device status
information displayed on the LCD Screen.
• Units: Allows user to change displayed units of measurement: °C, °F, °R, K Units for the
temperature channel, %RH, mg/mL, Dew Point Units for the humidity channel and mbar,
PSI, inHg, mmHg, atm, Torr, Pa, m, kPa, MPa for the pressure channel.
• Wireless: Push and hold this button for 5 seconds to activate or deactivate wireless
communication.
• Manual Reset Option: Allows user to manually reset the statistics within the device to 0
without needing to use the MadgeTech software. Any data recorded up to that point is
recorded and saved. To apply the manual reset, press and hold the scroll key down for
three seconds.
LED Indicators
• Status: Green LED blinks every 5 seconds to
indicate unit is logging.
• Wireless: Blue LED blinks every 15 seconds
to indicate unit is operating in wireless
mode.
• Alarm: Red LED blinks every 1 second to
indicate an alarm condition.
Connecting Information
Port Information
The RFPRHTemp2000A data logger has an RTD
sensor located on the bottom of the device.
2