Nilfisk-ALTO L-16 - Manual (Page 13)

12
SUBGROUPS
SUB1 SUB2 SUB3 SUB4
LEVEL
MAIN MIX
10
dB
-5
-10
-20
-25
-30
-40
-60
0
5
10
dB
-5
-10
-20
-25
-30
-40
-60
0
5
10
dB
-5
-10
-20
-25
-30
-40
-60
0
5
10
dB
-5
-10
-20
-25
-30
-40
-60
0
5
10
dB
-5
-10
-20
-25
-30
-40
-60
0
5
RIGHT RIGHT RIGHT RIGHT
SUBGROUPS ASSIGN TO MAIN MIX
OUTPUT
SOLO MODE
AFL
PFL
TO AUX
TO AUX
MAIN MIX
AUX RETURNS SOLO
LEFT LEFT
4 - DFX2 SEND
LEFT LEFT
4-DFX2 RETURN
SUB 1/2
SUB 3/4
3
0
4
0
MAIN MIX
3
0
4
CTRL/R
0
SEND2
STEREO AUX RETURNS
1
0
2
SOLO
AUX SENDS
0
1 1
2
0
2
SEND1
0
0 0
SOLO ACTIVE
LEVEL SET
2TK TO MIX
CTRL ROOM
SUB 3-4
2TK IN
MAIN MIX
SUB 1-2
PHONES
CTRL ROOM SOURCE
SOLO
SOLO
SOLO
- +15 8
- +15 8
- +15 8
- +15 8
- +15 8
- +15 8
- +15 8
- +15 8
- +15 8
- +15 8
-2
-4
-10
-20
-7
L R
-30
10
CLIP
2
4
7
0
MAX - 8
MAX - 8
LEVEL
20 - Master AUX SENDS
The four switches are used to determine
the master AUX SEND levels, which can
be varied from -
to +15dB.
When the external effect unit connected
to mixer has no input gain control, you can
get a further +15dB gain available form
these AUX SEND outputs.
As to the AUX4, it can also provide the
lovable level adjustment for the internal
effect signal.
20
21 22 23 24
25
26
27
28 29
30
32
31
22 - Master STEREO AUX RETURNS
These four controls set the level of effects
that received from the stereo AUX RETURN
connectors, which can be varied from -
to +15dB. They are used to provide the
further gain for low level effects.
- MAIN MIX / CTRL/R 24
AUX RETURN3 is equipped with the MAIN MIX / CTRL/R button. Release the button to send the stereo signal
from AUX RETURN3 to MAIN MIX buses; Engage the button, then the stereo signal will be sent to CTRL/R
output.
21 - SOLO
The function of these SOLO buttons are
the same as the channel SOLO button,
they can also be affected by SOLO MODE
switch.
Press the SOLO button, the corresponding
AUX send will be routed to CTRL ROOM/
PHONES outputs and METERS display.
- TO AUX SEND1/2 23
The both rotary knobs assign the AUX
RETURN signals to their respective AUX
SEND outputs: The TO AUX SEND1 assign
the signal from AUX RETURN1 to AUX
SEND1 bus, and TO AUX SEND2 assign
the signal from AUX RETURN2 to AUX
SEND2 bus.
The adjustable range goes from -
to
+15dB.