Abocom WUE1500 - Manual (Page 4)

Hardware Installation
Installation of the USB Adapter
for Windows 98SE/ME/2000
Automatically
Precaution for Windows 98SE, 2000,
and ME users: If the Application setup in
Installation the Utility under
Windows98SE/ME/2000
has been
completed, follow below steps to install the
hardware.
For Windows 98SE users: As you
perform the installation, have your system
operating CD-ROM at hand. You may be
asked to insert the OS CD-ROM for the
system to download a specific driver.
1. Plug the square end (Type B) of USB
cable into the adapter's USB port.
2. Plug the rectangle end (Type A) of USB
cable into the PC's USB port.
3. Insert one end of your network cable into
the RJ-45 network port. Connect the other
end of the cable into a Hub.
After the device has been connected to your
computer, Windows will detect the new
hardware and then automatically copy all of
the files needed for networking.
Precaution for Windows 2000 users:
When Digital Signature Not Found
screen appears, click Yes to continue.
-
2 -