Abocom WUE1500 - Manual (Page 10)

Item Description
network. The name must be identical
for all devices and points attempting
to connect to the same network.
It shows the current SSID setting of
the Wireless USB Adapter.
Tx Rate
It shows the current transfer rate. (1,
2, 5.5, or 11Mbps or Auto)
Int. Roaming It displays the current roaming
status. (Disabled or Enabled)
Radio
It displays the current status of the
Wireless USB Adapter. (On or Off)
Status
It displays the information about the
status of the communication (the
BSSID of the Access Point to which
the card is associated).
Signal
Strength
It displays the signal strength of the
connection between the Wireless
USB Adapter and the Access Point it
connects.
Link Quality It displays the link quality of the
connection between the Wireless
USB Adapter and the Access Point it
connects.
Change
Click Change to change the
configuration parameters such as
Operating Mode, SSID, Tx Rate,
and Int. Roaming. (In Peer-to-Peer
mode, Channel button is enabled).
Submit
Click Submit to save the changes.
Cancel
Click Cancel to ignore the previous
setting.
Hide Click Hide to exit the application.
-
8 -