Blue-White Flow Verification Sensor (FVS) - Manual

80000-402 02/28/2008
Micro Flow - FVS (Flow Verification Sensor)
Electronic Flow Verification
Are you sure the pump is actually pumping?
Empty chemical tank, clogged injection fitting, lost prime, an other problems can prevent a metering pump from
actually injecting chemical - even though the pump is in good working order.
Installation Options
The Micro Flow FVS (Flow Verification Sensor) is designed to give you many installation options.
The sensor can be installed:
! Directly on the pumphead of a Blue-White pump (see next page).
! Anywhere on the discharge side of a diaphragm pump.
! Anywhere on the suction side of a peristaltic pump.
The wiring for the sensor can be connected directly to a Blue-White pump. The pump will stop pumping if the
sensor detects no flow. A relay will then close allowing for remote alarm indication or initiation of a back-up
injector pump.
Industries, Ltd.
Blue-White
Industries, Ltd.
®
5300 Business Drive | Huntington Beach | CA | 92649 | USA