Blue-White F-462 Polysulfone Molded - Manual (Page 4)

BLUE-WHITE INDUSTRIES LIMITED WARRANTY
FLOWMETERS are warranted to be free of defects in material and workmanship
for up to 12 months from the date of factory shipment. Warranty coverage is
limited to repair or replacement of the defective flowmeter only. Blue-White
Industries does not assume responsibility for any other damage that may occur.
This warranty does not cover damage to the flowmeter that results from misuse
or alterations, nor damage that occurs as a result of: meter misalignment,
improper installation, over tightening, use of non- recommended chemicals, use
of non-reccomended adhesives or pipe dopes, excessive heat or pressure, or
allowing the meter to support the weight of related piping. Flowmeters are tested
and calibrated with water and air only. Although meters may be suitable for other
chemicals, Blue-White cannot guarantee their suitability.
Flowmeters are repaired at the factory only. Call or write the factory to receive a
Return Authorization Number, carefully pack the flowmeter to be returned,
including a brief description of the problem. Note the RA number on the outside
of the carton.
BLUE-WHITE INDUSTRIES
5300 Business Drive - Huntington Beach, CA 92649
(714) 893-8529 l Fax: (714) 894-9492
URL: www.Blue-White.com
Email: [email protected]
[email protected]
Blue-White
Industries, Ltd.
R
1 Polysulfone 6 Meterbody
1
5
Float
F- 462 Exploded View and Parts List
Catalog Number Description Amount Item
1
2
3 F-452004N Union Nut, Nylon 2
F-452330N Adapter, 2" FNPT, Polysulfone 2
F-452002 Float Stop, Polysulfone 2
4 F-452043N O-ring, Viton 2
1
2
3
4
5
6
2-20 GPM, PTFE
5-50 GPM, PTFE
8-80 GPM, PTFE