Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 2)

7. Now the Ready to Install screen
– Click Install.
8. Next is the Driver Signature screen
– Click OK.
9. Next you’ll see the Bluetooth ® Device not found screen
– Plug the Belkin ® Bluetooth receiver into the cable and plug
the cable into the USB port on the laptop. Verify that the blue
LED on the Belkin receiver is flashing. Click OK.
10. Install completed screen.
– Click Finish.
11. You must restart your system window pops up. Click Yes.
System reboots.
Set up Bluetooth Services
12. When the system is restarted, double click on My
Bluetooth Places. You should see the Configuration
Wizard.
13. All three boxes on the first Wizard screen should be
checked. If they are not, check them. Then click Next.
2