American Comfort GMCN 100 Series - Manual (Page 8)

1-877-645-0299 www.AmericanComfort.com 6
Operating Instructions
Mode
Press MODE button to select required working mode: DEHUMIDIFIER, COOLING or FAN. The
corresponding LED will light up.
Cooling Instructions
To control the cooling temperature:
1. Press the “Mode” button until the “Cool” icon light is on.
2.
Press the “UP” or “DOWN” button to select a desired cooling temperature. (62°F – 90°F / 16°C –
31°C)
3.
Press the “Fan Speed” button to select fan speed. (High or Low)
Dehumidifying Instructions
To control the dehumidifying settings:
1.
Press the “Mode” button until the “Dehumidify” icon light is on.
2. Select the actual ambient room temperature (please note that there is default tolerance of 2°
between the room temperature measured by any thermometer in the house and the actual
temperature)
3. Set the fan speed to LOW.
CAUTION:
 When using cooling and dehumidifying functions, let the unit run for at least 3 minutes before
shutting it off or switching between functions.
 Make sure the power supply meets the requirements. AC115V, 60Hz
 Do not share one socket with other appliances.
Fan Instructions
To control the fan setting:
 Pres s the “Mode” button until the “FAN” icon light is on.
 Press the “FAN” button to select a desired fan speed. (HIGH or LOW)
Timer Instructions
Auto-On setting:
 When the air-conditioner is OFF , press the “Timer” button and select a desired Auto-On timer using
the “UP” and “DOWN” buttons.
 The “Auto-ON Timer” is displayed on the LED panel.
 The Auto-On timer can be changed at any time in 0-24 hours.