Amerex 14425 User Manual

Amerex Safety

SERVICE MANUAL

NO. 14425

for

AMEREX

HALOTRON I

HAND PORTABLE

“CLEAN AGENT” FIRE EXTINGUISHERS

(FOR NON-RESIDENTIAL APPLICATIONS)

* * * HAVE EXTINGUISHERS RECHARGED IMMEDIATELY AFTER ANY USE * * *

All fire extinguishers should be installed, inspected and maintained in accordance with the National Fire
Protection Association standard titled "Portable Fire Extinguishers", NFPA-10 and the requirements of local
authorities having jurisdiction.

When maintenance is indicated it should be performed by trained persons having proper equipment. Fire
extinguishers are pressure vessels and must be treated with respect and handled with care. They are
mechanical devices and require periodic maintenance to be sure that they are ready to operate properly and
safely. Amerex strongly recommends that the maintenance of portable fire extinguishers be done by a trained
professional – your local authorized Amerex Distributor.

Amerex Corporation makes original factory parts available to insure proper maintenance – use of substitute
parts releases Amerex of its warranty obligations. Amerex parts have machined surfaces and threads that are
manufactured to exacting tolerances. O-rings, hoses, nozzles, and all metal parts meet precise specifications
and are subjected to multiple in-house inspections and tests for acceptability. There are substitute parts
available that are incorrectly labeled as UL component parts, some are advertised as Amerex type. None of
these meet UL requirements and all of them voids the Amerex extinguisher warranty and UL listing. DO NOT
SUBSTITUTE.

AMEREX CORPORATION – P.O. BOX 81 – TRUSSVILLE, ALABAMA 35173-0081

Phone: (205) 655-3271 Fax: (800) 654-5980

e-mail: [email protected] Web Page:

http://www.amerex-fire.com

Printed in U.S.A.

OM14425D-02/05

REFERENCES IN THIS MANUAL:

AVAILABLE FROM:

NFPA-10 Portable Fire Extinguishers

National Fire Protection Association

1 Batterymarch Park, P. O, Box 9101

Quincy,

02269-9101

CGA C-1 Methods for Hydrostatic Testing of

Compressed Gas Association, Inc.

Compressed Gas Cylinders

4221 Walney Road, 5

Floor

CGA C-6 Standard for Visual Inspection of

Chantilly, VA 20151-2923

Compressed Gas Cylinders