Amerex 05612 - Manual (Page 10)

9
Guide to Proper Installation
of Hose on
50 lb.
Wheeled or Stationary
Dry Chemical
Fire Extinguishers
1
Connect hose coupling to outlet on
the extinguisher. Lay hose straight
on ground to its full 25 ft. length.
Start first regular loop counter-
clockwise by placing between side
brackets and over the top bracket.
2
The second loop is a REVERSE
loop. Notice that the hose passes
behind the loop on this reverse
loop.
If instructions are
followed, the hose will uncoil
without kinks.
3
The next loop is a regular "hose in
front" loop. Succeeding loops are
alternated: reverse, front, reverse,
etc. for six full loops.
4
Adjust the loops so that the nozzle
fits into the nozzle mount. Loops
should be approximately the same
size.