Alicat Flow Vision MX - Manual (Page 8)

8
Blending Gases
Adjusting Concentrations
The concentration of each gas in the overall
mix can be adjusted in three ways.
The background of the Percent of Mixture
gauge can be clicked (1) to change a
concentration to a selected value.
The indicator on the right of the gauge (2) can
also be dragged up and down to adjust the
value.
Finally, the value can be edited directly in the
box under the gauge ( 3).
Mixing cannot begin until the total of all
concentrations reaches 100%.
When this occurs, the “Start Mixing” button
is enabled.
Devices that are at zero percent will not be represented in the final
blend readings.
Controlling these devices outside of Flow Vision™ MX will create
inaccurate blend readings.
1
3
2