Alicat Flow Vision MX - Manual (Page 10)

10
Saving a Blend
Begin by selecting File > Save Blend from the menu.
You will be prompted for a location on disc to store your blend.
Enter a file name and click the “Save” button.
Blends are stored using the .fvb extension in XML format and can be modified
using a text editor.
Loading a Blend
Choose File > Load Blend from the menu to launch the open file dialog.
Navigate to the desired blend file (.fvb) and click the “Open” button.
The stored blend will be loaded, overwriting any existing blends.
Changing Flow Units
By default, all flow readings in Flow Vision™ MX are in SLPM.
The units can be changed by selecting the desired units from the Edit > Flow
Units
menu.
Changing Decimal Places
By default, all flow readings are shown to two decimal places.
Decimals can be increased or decreased using the Edit > Decimals menu.
Increasing the decimal places will not increase the resolution of the devices.