beautypg.com

Viewing unit operating status, Setting up, Ultima compact condensing units – Airedale Ultima Compact Condensing Unit 30kW - 450kW User Manual

Page 26: Controls

background image

ULTIMA COMPACT

Condensing Units

26

Condensers & Condensing Units

Installation & Maintenance : 6259675 IM V1.4.0 10/2013

-

Controls

OPERATION (CONT..)

Standard Operating
Page cont.

The following Menus can be accessed from the Operating Page, it is recommended that

the display is always returned to the Operating Page by using the

Esc

key

Password Protection

To guard against unauthorised adjustments, a password is required to gain access to
certain menus as defined below.

FACTORY SET PASSWORD PIN NUMBER: 4648 (or Customer chosen number).

When a password is requested use the

keys to enter the number and

to

access the page.

Menus
(Listed in Sequence)

Menu

Description

Password

Switch On/Off Enable or Disable the unit

Open Access

Service

Allows selection of setpoint limits, enables unit on/off
from display, remote on/off and remote pump on/off.

Default 4648

Setpoint

Allows setpoint adjustment, includes supply
temperature setpoint and unit temperature
differential.

Default 4648

Status

Displays current status on digital and analogue inputs
and outputs.

Open Access

Maintenance

Displays hours run for compressors and pumps (if
fitted). Also includes Electronic Expansion Valves (if
fitted).

Default 4648

Clock

Allows adjustment of real time clock, time zones

Default 4648

Alarm Log

Display last 100 alarms in chronological order.

Open Access

Manufacturer Factory use only.

Airedale Only


VIEWING UNIT OPERATING STATUS

Status Menu

Allows access to view operating status of Digital and Analogue Inputs and Outputs.

Using the Navigation instructions and the wiring diagram provided, the relevant Sub-
Menus
can be accessed.

SETTING UP

Real Time Clock

(Optional to UCC30-80 Single
Circuit Only)

The units leave the factory set, however follow the Navigation instructions if necessary.

Time Zones

The programme provides 3 On/Off periods per day, 7 days per week. The unit is factory
set for continuous operation.

Technical Support

For further details, please contact Airedale.