ZAGG Logitech Keyboard Case by ZAGG for iPad 3 & 4 - Manual (Page 2)

Storing the iPad 2 for travel
To store the iPad 2
1. Line up the 30-pin port connecter on the
iPad 2 with the slot on the short end of the
Keyboard Case.
2. Place the iPad 2, screen down, into the
Keyboard Case.
To separate the iPad 2 from the
Keyboard Case
1. Place the iPad 2/Keyboard Case vertically on
a non-slip surface. Refer to the drawing.
2. Place one hand on each side of the Keyboard
Case, securing the Keyboard Case with one
thumb and the iPad 2 with your other thumb.
3. Apply slight downward pressure to the
iPad 2 and separate the Keyboard Case from
the iPad 2.
Battery
The Keyboard Case uses a long-life,
rechargeable battery that gives you several
weeks of normal use. The Keyboard Case goes
into sleep mode if it’s left on and not being used.
Press any key and wait a second or two to bring
the Keyboard Case out of sleep mode.
The lithium-polymer battery in the Keyboard
Case has no memory effect and may be charged
whenever you wish.
When not in use for a prolonged period, we
recommended that you turn off the keyboard to
lengthen the battery life.
Special features and options
Please note that the Keyboard Case is made
from aircraft aluminum with a high-grade finish
similar to the finish on many popular devices.
Optional: A set of four rubber feet is
included, which you can place on each
corner of the Keyboard Case bottom to help
prevent scratching high-grade finish of the
Keyboard Case.
For unparalleled scratch protection, we
recommend ZAGG’s invisibleSHIELD®
or ZAGGskins™.
What do you think?
Please take a minute to tell us. Thank you for
purchasing our product.
www.logitech.com/ithink
Keyboard
cutout