ZAGG ZAGGkeys PRO/PROplus for iPad 2, 3, & 4 - Manual (Page 3)

TO CLOSE, LINE UP THE CUTOUT IN THE
ZAGGkeys
PRO/PROplus WITH THE 30-PIN
CHARGER PORT ON iPAD®, AND PLACE iPAD®
FACE DOWN ONTO THE
PRO/PROplus . THE
MAGNETS WILL ATTRACT AND SECURE iPAD®
TO THE ZAGGkeys
PRO/PROplus . iPAD® WILL
AUTOMATICALLY SWITCH TO SLEEP MODE
WHEN SECURED IN THE ZAGGkeys
PRO/PROplus
AND START UP WHEN THE DEVICES ARE
SEPARATED. THIS FUNCTION CAN BE
TOGGLED ON OR OFF IN THE SETTINGS
MENU OF YOUR iPAD®.
NOTE: THE ZAGGkeys PRO/PROplus AND
iPAD® MUST BE ALIGNED PROPERLY FOR
THE MAGNET CLOSURE TO FUNCTION. IF
THE ALIGNMENT IS NOT CORRECT, THE
MAGNETS WILL NOT ATTRACT.
POSITIONING
SIMPLY PLACE iPAD® EITHER
VERTICALLY OR HORIZONTALLY
INTO THE SLOT AND LEAN THE
DEVICE BACK. THE DESIGN OF
THE CHANNEL AND THE WEIGHT
OF THE DEVICE, WILL HOLD
YOUR iPAD® SECURELY IN PLACE
DURING NORMAL USE.
CENTRAL GROOVE