Thermo Fisher Scientific Alpha pH 200 (In the process of updating the brand guideline & product image) - Manual (Page 5)

- 1 -
1 INTRODUCTION
Thank you for purchasing a αlpha pH 200 ⅛ DIN pH/ORP Controller. This
controller is part of a series of quality process controllers available from Thermo
Scientific/ Eutech Instruments. These sturdy, economical pH/ORP controllers are
designed with the features and reliability of a much more expensive instrument.
Your controller includes:
•
Removable terminal blocks for easy connections;
•
Two mounting brackets for easy panel mounting;
When shipped, the controller is set to the pH mode. See Setup program P3.1 for
directions on selecting ORP mode.
Some features of this controller are:
•
Two set point, two SPDT relay operation
•
Scrolling, 14-segment LED guides user easily through setup functions
•
Reliable power supply from 85 to 260 V AC, 50/60 Hz or DC withstands
voltage fluctuations
•
Push-button operation from the front panel
•
Two-point pH calibration, offset temperature and ORP calibration
•
Adjustable hysteresis band prevents rapid contact switching near set-point
•
Selectable automatic or manual temperature compensation
•
Two-level password protection
•
Removable terminal strips for quick and easy connections
•
Non-Volatile memory retains setup even if power fails, and lets you configure
unit before installation
•
Isolated 4-20 mA output for remote monitoring or hard copy recording