Thermo Fisher Scientific CyberScan 6000 Series Meters v.2 - Manual (Page 5)

90
Conductivity Setup: Set Display Criteria
PC6000, CON6000, PC6500 and PCD6500 meters
Technology Made Easy ...
This screen allows you to choose what information you would like to be displayed on the
conductivity Measure screen, particularly the information contained in the data box at the bottom
of the Measurement screen. The status of the current display criteria is displayed on the screen.
The criteria option is active if ON appears to the right of the option. It is inactive if OFF appears to
the right of the option.
To set Display Criteria
1. Touch the Touch here to edit button next to the Display Criteria to access the
Conductivity Display Criteria Setup screen.
2. Touch ON or OFF to change the status of a criteria you want to modify.
3. Repeat step 2 for all the remaining criteria.
4. Touch the OK button to accept the changes of the entire group of display criteria and
return to the conductivity Setup screen.