beautypg.com

Thermo Fisher Scientific Thermo Scientific Temp 300 User Manual

Page 9

background image

- 6 -

4. BATTERY

INSTALLATION

AND

REPLACEMENT

The total battery life without
backlighting and alarm is about 400
hours. The battery bar annunciator
represents the battery strength. An
empty battery annunciator indicates low
battery strength; a blinking battery
annunciator indicates that the batteries
should be replaced immediately.

Selected settings are stored in memory
and will remain in memory even after
power is turned off, or while batteries
are being replaced.

1. Before

changing battery, turn

instrument off and disconnect
thermocouple.

2. Loosen screw and lift battery cover off

back of case.

3. Remove the three AA batteries.
4. Insert

three

new batteries observing

polarity.

5. Install cover and tighten screw.