Seametrics IP100-200-SERIES - Manual (Page 3)

TABLES AND DIAGRAMS
Page 1
GENERAL INFORMATION
FEATURES
Adapter mates with
2” FNPT threaded
fittings
Full-port 2” ball valve
for sensor removal
2” Adapter
removes to mount
hot-tap machine
3/4” diameter tubing
for low insertion force
IP150/250
Rotor
Rugged cast aluminum housing
18 Foot Cable
Modular electronics (optional)
• rate/total/pulse/4-20 mA
• blind 4-20 transmitter
• pulse divider
Compression nut
for easy adjustment, secure locking
Adapter fitting mates with
1-1/2” FNPT threaded fittings
Rotor housing
Removable jewel bearings for
exceptional low flow performance
IP110/210
SPECIFICATIONS*
GENERAL INFORMATION
The IP100/200-Series are adjustable depth insertion paddle-
wheels that come in brass, PVC or 316 stainless models to fit
3” to 40” pipe. Adapters mate with standard 1-1/2" (110/210)
or 2” (150/250 or PVC 110/210) NPT fittings such as saddles
and weldolets which may be purchased either locally or from
Seametrics.
Ruby bearings and a non-drag Hall-effect sensor give these meters
the widest flow range of any of the paddlewheel types. A sensor
detects the passage of miniature magnets in the six rotor blades.
The resulting square-wave signal can be sent for hundreds of
feet over unshielded cable without a transmitter and connected
directly to many PLC’s and other controls without any additional
electronics.
If desired, a modular system of electronics can be installed
directly on the flow sensor or mounted remotely. The FT415 (bat-
tery powered) and FT420 (externally powered in a splashproof cst
housing) provide digital rate and total display, as well as program-
mable pulse output; the FT420 also provides a 4-20 mA analog
output. The AO55 is a blind analog transmitter. Programmable
pulse for pump pacing is available with the PD10.
The “hot-tap” models (IP150/250) can be installed or serviced
without shutting down the line by means of a 2” full-port isolation
valve that comes with a nipple for installation on the pipe fitting.
In most circumstances, no special tool is required.
Locking collar
IP110/150 IP210/250
3” to 12” (50 - 300mm) 12” to 40” (300 - 1000mm)
Hall Effect sensor, 12 Vdc current sinking pulse
Cast aluminum
Brass or 316 SS
PVDF (Kynar)
Nickel-bound tungsten carbide (zirconia ceramic optional)
Ruby jewel
Brass/SS 110/210 Brass/SS 150/250 PVC 110/210/150/250
None Bronze (316SS optional) (PVC uses gate valve)
1.5” FNPT 2” FNPT 2" FNPT
0.3 - 30 feet/sec (0.1 - 9 meter/sec)
+/- 1.5% of full scale
Brass/SS 200˚ F (93˚ C) PVC 130˚ F (55˚ C)
Brass/SS 200 psi (14 bar) PVC 150 psi (10 bar)
0.44 x pressure in pipe
5-24 Vdc, 1.5 mA
#22 AWG 3-con, 18’ (6m); 2,000’ (650m) maximum cable run
Pipe Size
Sensor
Materials Housing
Sensor Body
Rotor
Shaft
Bearings
Isolation Valve
Fitting Size Required
Flow Range
Accuracy
Maximum Temperature
Maximum Pressure
Insertion Force
Power
Cable
*Specifications subject to change. Please consult our website for the most current data (www.seametrics.com).
Note: For larger pipe sizes contact factory