beautypg.com

Revo REVDN700-2 User Manual

Page 12

background image

If you exit menu, doing Initialize started while 4~5 seconds the background.
During initialization the background, it is good to be none of moving objects.
When Day / Night mode is changed or Cam Set is changed, the background of the re-
initialization performed.
Global Functions

: This functions being performed in the entire area.

- Output Select

: It must be specify the outputs, each function will be enabled.

Press [Enter Key], to select output of each detection zone.

Alarm: Trigger alarm to output port.

Communication: Event string sends on RS-485
Screen: Display on screen.
Back: return to previous menu.

- Detections

Motion: General motion detection

Loitering

: Within a set period of time, detect loitering objects of entire screen.

NOTE:
* Please don’t use as a signal for video recording start.
*
The result of loitering detection can be inaccuracy.

Abandon/Absent: Detect the difference to stored background.

NOTE:
* Please don’t use as a signal for video recording start.
*
The result of abandon/absent detection can be inaccuracy.

Scene Change

: Detect a change in the screen.

NOTE:
* It is good for detecting scene change, including vertical lines or high contrast objects of the

background.

* Please don’t use as a signal for video recording start.
*
The result of scene change detection can be inaccuracy.

Windy Area Detection

: Detect continuous movement caused by wind or etc.

If same movement occurs in same area, alarm is ignored in this area.
If no motion is detected for a period of time, windy area turns off.

NOTE:
* Please don’t use as a signal for video recording start.
* In Simple mode is not supported.
*
The result of windy area detection can be inaccuracy.

1) Zone Base Functions

Max 10 Zone can be configured.

NOTE:
* Because they share area ID with Privacy mask, it can not be used same ID.

- Zone: Select zone ID.

- Func(Function) : Zone Function On/Off (Blinking enabled area).
- Shape: Select area shape.

Color

: Select area’s frame color.

Rect(Rectangle)

: Adjust rectangle with 4-arrow keys.

Press [ENTER] key is to finish edit area.

12