Revo RM2LCD19 - Manual (Page 7)

English - 3
SETUP SETUP
Stand Assembling Procedures
Stnad Disassembling Procedures
The monitor is packed with stand and main body separated.
Please join the stand with the main body before use.
1. Put some smooth pad or cloth on the level surface and place the
monitor on it with the face downward.
2. Insert the protrude of stand thoroughly into pedestal.
1. Put some smooth pad or cloth on the level surface and place the
monitor on it with the face downward.
2. In order to detach pedestal, press the groove on the back of
protrude connected to the body, using an object with sharp end.
(Note that fixation spot can be broken with too much force)