Precision Control Systems 1029C User Manual

Page 3

CONTROL CONCEPTS, INC. 2 YEAR LIMITED WARRANTY

CONTROL CONCEPTS, INC. warrants that the products delivered will be as described in the sales order or contract.

CONTROL CONCEPTS, INC. warrants to the original user that CONTROL CONCEPTS, INC. products will be free from

defects in materials and workmanship for a period of two (2) years after the date CONTROL CONCEPTS, INC. ships

such products.

If any CONTROL CONCEPTS, INC. product is found to be defective in material or workmanship during the applicable

warranty period, CONTROL CONCEPTS, INC.’s entire liability, and purchasers sole and exclusive remedy, shall be the

repair or replacement of the defective product at CONTROL CONCEPTS, INC.’s election. CONTROL CONCEPTS,

INC. shall not be liable for any costs or expenses, whether direct or indirect, associated with the installation, removal or

re-installation of any defective product. All shipping and freight costs are the responsibility of the customer. CONTROL

CONCEPTS, INC.’s limited warranty shall not be effective or actionable unless there is compliance with all installation

and operating instructions furnished by CONTROL CONCEPTS, INC., or if the products have been modified or altered

without the written consent of CONTROL CONCEPTS, INC., or if such products have been subject to accident, misuse,

mishandling, tampering, negligence or improper maintenance. Any warranty claim must be submitted to CONTROL

CONCEPTS, INC. in writing within the stated warranty period.

CONTROL CONCEPTS, INC.’s limited warranty is made in lieu of, and CONTROL CONCEPTS, INC. disclaims all other

warranties, whether expressed or implied, including but not limited to any IMPLIED WARRANTY OF MERCHANTABILITY,

ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, any implied warranty arising out of a course

of dealing or of performance, custom or usage of trade.

CONTROL CONCEPTS, INC. SHALL NOT, UNDER ANY CIRCUMSTANCES BE LIABLE FOR ANY DIRECT, INDIRECT,

INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS,

REVENUE OR BUSINESS) OR DAMAGE OR INJURY TO PERSONS OR PROPERTY IN ANY WAY RELATED TO

THE MANUFACTURE OR THE USE OF ITS PRODUCTS. The exclusion applies regardless of whether such damages

are sought based on breach of warranty, breach of contract, negligence, strict in tort, or any other legal theory, even if

CONTROL CONCEPTS, INC. has notice of the possibility of such damages.

By purchasing CONTROL CONCEPTS, INC.’s products, the purchaser agrees to the terms and conditions of this limited

warranty.

WARNING: The Control Concepts, Inc. power controllers use power thyristors to switch voltage to the connected

load. Line voltage must be assumed at the output terminals at all times, even when the control signal has been

removed and the load voltage appears to be off. It has been mandated by the National Electrical Code and the

Occupational Safety and Heath Act of 1970 that a physical disconnect be opened ahead of all remotely actuated

controls before performing any maintenance work on the controller or its connected load.

PROPRIETARY DATA

The information and design disclosed herein are the property of Control Concepts, Inc. and may not be used,

reproduced or disclosed in any form except as granted in writing by:

CONTROL CONCEPTS, INC

7870 PARK DRIVE

CHANHASSEN, MN 55317

PHONE: (952) 474-6200

TOLL FREE: (800) 765-2799

FAX: (952) 474-6070