NSi Industries EH20B - Manual (Page 5)

PROGRAMMING YOUR EH10B / EH20B
NOTE: AFTER MAKING ANY CHANGES TO THE
PROGRAM, PRESS MODE TO GO TO RUN MODE
AND THEN PRESS EVENT TO UPDATE THE
LOAD STATUS.
AT POWER UP:
When powering up the unit for the first time, allow
1-2 minutes to charge the supercap and the dis-
play will show E17 60 r - 0A, then 12:00 AM will
flash on the display.
Press the MODE key to go to the CLK mode.
After pressing the MODE key the display will
show:
1.0 TO SET CLOCK
Press HOUR and MIN to advance to the present
hour and mins. Check AM/PM, and press ENTER.
1.1 TO MODIFY CLOCK
Press MODE until the display shows: CLK. Press
HOUR and MIN. to modify clock and press ENTER.
2.0 TO SET DATE
If you are setting for the first time, display will show:
Press MONTH, DATE, and YEAR key to advance to
the desired month, date and year, then press
ENTER.
NOTE: The day of the week will be automatically
set once the date is set.
3
MO TU WE TH FR SA SU ASTRO
CH1 MOM AM PM OFFSET CH2
CLK DATE SCH AUTO MAN
MO TU WE TH FR SA SU ASTRO
CLK DATE SCH AUTO MAN
EH10_20B single 7/24/07 11:10 PM Page 5