NSi Industries DZS200BP - Manual (Page 7)

EVENT (in the RUN mode) key is used to update the
load status. It will execute the last scheduled event for
CH1 and CH2. The display will only show the last sched-
uled event for CH1. To view the last schedule event for
CH2, simply press the EVENT key again. If there is no
schedule programmed for CH1 or CH2, the display will
show —:—
10.1 NOTES:
1. Unit will go to RUN MODE automatically if no
key is pressed for 5 minutes.
2. Unit has a look back feature. If you have just
finished setting the unit and an output is to be
updated, press the EVENT key. Unit will auto-
matically pick up the last schedule.
3. Clear all memory. To clear all memory, while in
the RUN mode, press E N T E R, display will show :
Use the event key to display:
Now Press ENTER briefly and everything in the
timer memory is wiped off including real time,
date and 12HOUR will flash.
11.0 COPY PROGRAM SETTINGS TO ANOTHER
MEMORY MODULE (FOR BP MODELS ONLY)
WARNING: DO NOT USE UNIT AS COPIER WHILE
PROGRAMS SETTINGS ARE ACTIVE. DOING SO
WILL TURN OFF ANY CONNECTED LOADS.
Follow steps below:
NOTE: Memory Module should be inserted.
-
Take unit out of enclosure
12
If daylight savings is required, press ENTER, dis-
play will show:
Press ENTER to accept default dates (second
Sunday in March) or press MONTH, DATE, and
DAY to modify DST settings and press ENTER.
The display will show:
Press ENTER, display will show:
P r e s s ENTER to accept default dates (first
Sunday in November) or press MONTH, DATE,
a n d DAY to modify DST settings and press
ENTER. Press MODE, the display will show:
NOTE: DST OFF indicates Daylight Savings Time
was not set.
4.0 SEASON DURATION SET
Up to 4 different season durations can be set by
entering the START and END dates.
5
DTS200B - DZS200BP 3/8/07 9:18 AM Page 13