NSi Industries DGS120 Old Series - Manual (Page 3)

Press DAY/MONTH key to select today’s day. Press
HOUR key to set present hour (check AM/PM). Press
MIN key to set present minute. Press ENTER key. Unit
now stores present time. Seconds are set to zero.
DAYLIGHT SAVING
The user may select either standard U.S. option or no
daylight saving at all.
1. U.S. OPTION: Daylight saving is automatically set
when entering the current month/date/year. The
unit will add one hour on the first Sunday in April,
and subtract one hour on the last Sunday in
October. You never need to look up the tables, or
enter the spring and fall correction dates yourself.
2. NO DAYLIGHT SAVING: The unit will not be con-
figured for daylight saving time corrections by not
entering the month/date/year.
TO SET DATE
NOTE: ENTER ONLY IF AUTOMATIC DAYLIGHT
SAVING IS DESIRED. IF NOT REQUIRED, DO
NOT
SET DATE. INSTEAD, SKIP THE FOLLOWING
SECTION AND PRESS MODE KEY UNTIL DIS-
PLAY SHOWS SET.
Press MODE key until display shows DATE.
Press MONTH key to set present month. Press DATE
key to set today’s date. Press YEAR key to set present
year. Press ENTER key. Unit now stores present date.
Note: If unit has correct entry for the calendar, then
the unit will go into the SET mode. If the calendar has
an incorrect entry, then the unit will stay in the DATE
mode, with MM--YY displayed, signifying that the
date does not correspond with the month, and/or
year, i.e. Feb. 31,1999. If this occurs, set the correct
date, and then press ENTER.
DATE
4
SETTING THE UNIT
SELECT AM/PM OR
24 HOUR MILITARY FORMAT
Upon powering up the unit the LCD will display the
model number. The LCD will next display 12H which
is an automatic (AM/PM) format.
Press ENTER to keep AM/PM format or press HOUR
key to alter to 24 hour (Military) format and then
press ENTER.
Once the ENTER is pressed, unit goes to RUN mode
You can recognize that the unit is in the RUN mode
when the real time (including seconds) is displayed.
NOTE: Once you select and ENTER the above for-
mat (either AM/PM or 24 hour military), you can not
alter it without removing all power to the unit by dis-
connecting the battery and line power.
TO SET CLOCK
Press MODE key; display shows CLK.
3
SU
AM
OFF
SU
AM
CLK