Martel Electronics SP5-1710-BL - Manual

Specification Min. Typ. Max. Unit
Accuracy (overall error) * 1 Segment (±1)
Full scale reading (left/right hand zero position) 0 1 V d.c.
(centre zero position) -1 1
Resolution 62.5 mV d.c.
Supply voltage (meter only, not LED backlighting) 5 9 12 V d.c.
V d.c.
(left/right hand zero position)
(centre zero position)
125 mV d.c.
Sample rate 4 samples/sec
Operating temperature range 0 50 °C
Supply current (meter only, not LED backlighting) 6 10 mA
Supply voltage for LED backlighting** 4.5 5 5.5 V d.c.
Supply current for LED backlighting @5V d.c.** 50 mA
* At voltages above 1V d.c. or below -1V d.c., the display flashes.
** For backlighting supply voltages in excess of 5Vd.c., consult Various Operating Modes on page 4.
17 Segment LCD
Colour Scale
0-1V and -1V-0-1V d.c. Ranges
No Calibration Required
Screw Terminal Connection
LED Backlighting
Splashproof
ELECTRICAL SPECIFICATIONS
This low cost, compact indicator is ideally suited for low or high volume applications. The meter features a 17
segment LCD to display 0-1V or -1V-0-1V d.c. full scale reading. Other voltages and currents can be indicated via
the addition of 2 external scaling resistors. The meter can be used in applications where the order of magnitude
of the reading is more important than the value of the reading itself. It allows the operator to scan the display and
receive a quick visual feedback. The module is mounted into the panel, using the supplied clip. A rubber seal is
included, providing splashproof protection for the unit when fitted to the meter during installation.
SP 5-1710-BL
17 Segment Analogue LCD Meter
LASCAR ELECTRONICS INC.
3750 WEST 26th STREET
ERIE
PA 16506
USA
TEL: +1 (814) 835 0621
FAX: +1 (814) 838 8141
E-mail: [email protected]
Page 2 of 4 Page 2 of 4
Page 1 of 4 www.lascarelectronics.com
LASCAR ELECTRONICS LTD.
MODULE HOUSE
WHITEPARISH
WILTSHIRE
SP5 2SJ
UK
TEL: +44 (1794) 884567
FAX: +44 (1794) 884616
E-mail: [email protected]
LASCAR ELECTRONICS (HK) LIMITED
FLAT C, 5/FL., LUCKY FTY. BLDG.
63-65 HUNG TO ROAD
KWUN TONG
KOWLOON
HONG KONG
TEL: +852 2797 3219
FAX: +852 2343 6187
E-mail: [email protected]
SAFETY
To comply with the Low Voltage Directive (LVD 93/68/EEC), input voltages to the module’s pins must not exceed
60Vdc. The user must ensure that the incorporation of the panel meter into the user’s equipment conforms to the
relevant sections of BS EN 61010 (Safety Requirements for Electrical Equipment for Measuring, Control and
Laboratory Use).
0
ORDERING INFORMATION
Stock Number
Standard Indicator SP 5-1710-BL
Specifications liable to change without prior warning SP 5-1710-BL Issue 1 January/2004 M.C. Applies to SP 5-1710/2
PO Box 770, Londonderry, NH 03053 1-800-821-0023
www.martelcorp.com