Martel Electronics T140 Series - Manual (Page 3)

1. General Description
The T140 is designed to be an accurate, easy
to use pressure calibrator/manometer for a
variety of pressure measuring applications. Its
two port differential design allows the unit to be
used in both gage and differential measure-
ments providing a high degree of versatility. The
T140 is capable of storing maximum and
minimum pressure readings along with a hold
function to freeze a reading if desired.
1.1 Customer Service
Corporate Office:
www.martelcorp.com
e-mail: [email protected]
Tel: (603) 434-8179 800-821-0023
Fax: (603) 434-1653
Martel Electronics
3 Corporate Park Drive
Derry, NH 03038
1.2 Installation
Remove the Packing List and verify that all
equipment has been received. If there are any
questions about the shipment, please call
Martel at 1-800-821-0023.
When you receive the shipment, inspect the
container and equipment for any signs of
damage. Note any evidence of rough handling
in transit. Immediately report any damage to the
shipping agent.
NOTE: The carrier will not honor any claims
unless all shipping material is saved for their
examination. After examining and removing
contents, save packing material and carton in
the event reshipment is necessary.
1