Nilfisk-ALTO MX 107 C - Manual (Page 8)

600101071REVA
SPECIFICATIONS:
Rotomolded Body:
Vacuum:
VAC Shutoff:
Pump:
Vacuum:
Weight:
Dimensions:
Lifetime Warranty
3-stage
Ball float
7 Bar / 100 psi, demand pump,
28 KPA
27.1 Kg
73 X 45.7 X 67.3 cm
MX 107 C
EXTRACTOR
220 - 240V
ALWAYS UNPLUG THE MACHINE BEFORE
DISCONNECTING OR CONNECTING ANY
WIRES OR COMPONENTS
.
TROUBLESHOOTING:
IF THIS OCCURS CHECK THIS
Solution tank is empty.
Clogged spray tip.
Pump not running.
Valve on wand not operating
No power to pump. Test the switch. Test the pump motor. Replace if necessary.
Debris plugging cleaning tool or vacuum hose.
Drain gate is not completely closed, or seals are damaged. Vacuum lid is not closed
or gasket is damaged.
No power to motor. Test the switch. Test the vacuum motor.
Wrong tool being used.
NO SPRAY
PUMP DOES NOT RUN
LOW SUCTION
NO SUCTION
If you are unable to diagnose the problem, contact the company from whom you purchased your MX 107C
MAINTENANCE SCHEDULE
CLEAN ALL FILTERS X
FLUSH OUT with DESCALER
X
DAIL
Y
WEEKL
Y
MONTHL
Y
OTHER
CHECK POWER CORD
REPLACE VAC MOTOR BRUSHES
YEARL
Y
X
Around 1500 hours