KYORITSU 3126 User Manual

Page 5

̶ 3 ̶

# CAUTION

● Always make sure to set the Range switch to the appropriate

position before making a measurement.

● Set the Range Switch to “OFF” position after use and

disconnect the test leads from the instrument. Remove the
batteries if the instrument is to be stored and will not be used for
a long period.

● Do not expose the instrument to the direct sun, high

temperature and humidity or dewfall.

● Use a cloth dipped in alcohol for cleaning the test leads and the

part around the measuring terminals.

● Do not store the instrument if it is wet.

● The Voltage warning mark is being displayed during a measure-

ment and it flashes when voltages 30V(DC/AC) or more exist on
the circuit under test.

Symbols



Danger of possible electric shock



Instrument with double or reinforced insulation







Earth terminal

Crossed-out wheel bin symbol (according to WEEE
Directive: 2002/96/EC) indicating that this electrical
product may not be treated as household waste, but
that it must be collected and treated separately.