KYORITSU 3126 - Manual (Page 25)

̶ 23 ̶
7．Battery replacement
# DANGER
● Never open the battery compartment cover while making
measurement.
# WARNING
● To avoid getting possible electric shock, remove test leads
before opening the battery compartment cover. After replacing
batteries, make sure to tighten up the screw for battery
compartment cover.
# CAUTION
● Do not mix new and old batteries nor different types of batteries.
● Make sure to install batteries in correct polarity as marked
inside.
● After replacing batteries, confirm that the batteries are properly
installed in the compartment and well-contacted with each
battery contact spring. Improperly installed batteries may cause
a battery liquid leak.
(1) Set the Range switch to “OFF” position, and remove the test
leads from the instrument.
(2) Loosen the battery compartment cover fixing screws, and
remove the battery compartment cover. Always replace all 8
batteries with new ones at the same time.
(3) After replacing batteries, make sure to tighten up the screw for
battery compartment cover.
Make sure to install
batteries in correct
polarity as marked
inside.