KYORITSU 2033 - Manual (Page 3)

DANGER
●Never make measurement on a circuit above 300V AC or DC.
●Do not attempt to make measurement in the presence of
flammable gasses. Otherwise, the use of the instrument
may cause sparking, which can lead to an explosion.
●Never attempt to use the instrument if its surface or your
hand is wet.
●Do not exceed the maximum allowable input of any
measurement range.
●Never open the battery compartment cover when making
measurement.
WARNING
●Never attempt to make any measurement, if the instrument
has any structural abnormality such as cracked case and
exposed metal part.
●Do not install substitute parts or make any modification to
the instrument. Return the instrument to your distributor for
repair or re-calibration.
●Do not try to replace the batteries if the surface of the
instrument is wet.
●Always switch off the instrument before opening the battery
compartment cover for battery replacement.
CAUTION
●Make sure that the function selector switch is set to an
appropriate position before making measurement.
●Do not expose the instrument to the direct sun, extreme
temperatures or dew fall.
●Be sure to set the function selector switch to the“OFF”position
after use. When the instrument will not be in use for a long period
of time, place it in storage after removing the batteries.
−2−
2. Features
●Small Clamp Meter capable of AC/DC current measurement.
●Tear-drop-shaped jaws for ease of use in crowded cable areas and
other tight places
●Provides a wide measuring range from 0 up to 300A
●Designed to CAT.Ⅲ 300V and pollution degree 2 specified by the
international safety standard, IEC 61010-1.
●Data hold function to allow easy readings in dimly lit or hard-to-read
locations
●Sleep function to conserve battery life.
●Provides a dynamic range of 4,000 counts full scale
●Wide frequency range from 20Hz to 1kHz
●Transformer jaws fitted with Guard to further improve safety
−3−