KYORITSU 1009 - Manual (Page 6)

― 16 ―
● Operating Environmental −indoor use
conditions −altitude up to 2000m
● Temperature & Humidity range
(guaranteed accuracy) 23℃±5℃ Relative humidity: less than 75%
● Operating Temperature &
Humidity range 0℃∼+40℃ Relative humidity: less than 80%
● Storage Temperature &
Humidity range -20℃∼+60℃ Relative humidity: less than 70%
● Insulation Resistance It should be more than 10MΩ/DC1000V between electrical circuit and enclosures.
● Withstand Voltage It should be more than AC3700V/ for one minute between electrical circuit and enclosures.
● Overload Protection Voltage function : 400mV range : 250V(RMS.) 10seconds
except for 400mV range : 600V(RMS.) 10seconds
Resistance function : 250V (RMS.) 10seconds
Capacity function : 250V (RMS.) 10seconds
Frequency function : 250V (RMS.) 10seconds
Current function : uA, mA : Protected by 600V0.5A fuse
A : Protected by 600V/10A fuse
● Dimensions / Weight approx. 155(L) x 75(W) x 33(D) mm / approx. 260g(including batteries)
● Power source Two R6P(AA)1.5V or equivalent
● Accessories Test lead 1set / R6P (AA) 2p.c.s / Holster 1 /Instruction manual 1
● Fuse F 600V/500mA(fast acting type), φ6.3 x 32mm / F 600V/10A(fast acting type), φ6.3 x 32mm
CAUTION
The voltage shown above is the overload protection (overvoltage protection) for the instrument.
Make sure not to exceed the value of voltage shown above.
4. Instrument Layout
①Function Selector Switch ②Display
③RESET Key ④SELECT Key
⑤RANGE Key ⑥REL Key
⑦HOLD Key ⑧Hz/DUTY Key
⑨Measuring terminal (V/Ω/Hz) ⑩Measuring terminal (COM)
⑪Measuring terminal (mA) ⑫Measuring terminal (A)
⑬Test Leads ⑭Holster
①
③
④
⑤
②
⑪
⑫
⑩
⑨
⑧
⑦
⑬
⑭
⑥