KROHNE ALTOFLUX M 900 EN - Manual (Page 19)

Installation and operating instruction ALTOFLUX M900 and 3080 K 19
If you need to return flowmeters for testing or repair to KROHNE
Your electromagnetic flowmeter
• has been carefully manufactured and
tested by a company with ISO 9001
certification
• and volumetrically calibrated in one of the
world’s most accurate test rigs.
If installed and operated in accordance with
these operating instructions, your flowmeter
will rarely present any problems.
Should you nevertheless need to return a
flowmeter for checkout or repair, please pay
strict attention to the following points:
Due to statutory regulations concerning
protection of the environment and the health
and safety of our personnel, Krohne may only
handle, test and repair returned flowmeters
that have been in contact with liquids if it is
possible to do so without risk to personnel
and environment. This means that Krohne
can only service your flowmeter if it is
accompanied by a certificate in line with the
following model confirming that the flowmeter is
safe to handle.
If the flowmeter has been operated with toxic,
caustic, flammable or water-endangering
liquids, you are kindly requested
• to check and ensure, if necessary by rinsing
or neutralizing, that all cavities in the
flowmeter are free from suchdangerous
substances.
(Directions on how you can find out whether
the primary head has to be opened and then
flushed out or neutralized are obtainable
from Krohne on request.)
• to enclose a certificate with the flowmeter
confirming that the flowmeter is safe to
handle and stating the liquid used.
KROHNE regret that they cannot service your
flowmeter unless accompanied by such a
certificate.
S P E C I M E N certificate
Company: ……………………………………….. Address: ……………………………………………
Department: …………………………………….. Name: ………………………………………………
Tel. No.: ………………………………………….
The enclosed electromagnetic flowmeter
Type: …………………………………………….. KROHNE Order No. or Series No ………………
has been operated with the following liquid: ……………………………………………………………..
Because this liquid is
water-endangering * / toxic * / caustic * / flammable *
we have
– checked that all cavities in the flowmeter are free from such substances *
– flushed out and neutralized all cavities in the flowmeter *
(* delete if not applicable)
We confirm that there is no risk to man or environment through any residual liquid contained in
this flowmeter.
Date: ………………………….. Signature: ……………………………………………………………..
Company stamp: