Atlantis Land A02-F48-4G - Manual (Page 22)

50-Port Dual Web Rack Switch
16
To change the port setting, click on the ID parameter to enter to the selected port to configure its
Speed/Disable, Flow control and QoS setting.
Speed/Disable:
This setting has six modes: 100M Full, 100M Half, 10M Full, 10M Half, Auto and Disable.
Flow Control:
This setting determines whether or not the Switch will be handling flow control. Set FlowCtrl to
Enable for avoiding data transfer overflow. Or it sets to Disable; there is either no flow control or
other hardware/software management.
When the port is set to forced mode, then the flow control will automatically set to
Disable.
Sending packets between two groups may cause packet lost