Atlantis Land A02-F48-4G - Manual (Page 13)

50-Port Dual Web Rack Switch
7
The Switch is equipped with two Gigabit twisted pair ports, supported auto negotiable
10/100/1000Mbps and auto MDI/MDIX crossover detection function. These two ports can operate in
half-duplex mode for 10/100Mbps and full- duplex mode for 10/100/1000Mbps.
When the port was set to “Forced Mode”, the Auto MDI/MDIX will be disabled.
Mini-GBIC Ports (Port 51~52):
The Switch is equipped with two mini-GBIC ports, supported optional 1000BASE-SX/LX mini-GBIC
module (1000BASE-SX mini-GBIC module).
Reset:
The Reset button is to reset all the setting back to the factory default.
Note: Be sure that you recorded the setting of your device, else all the setting will be erased when
pressing the “Reset” button.
Rear Panel
AC Power Connector:
This is a three-pronged connector that supports the power cord. Plug in the female connector of the
provided power cord into this connector, and the male into a power outlet. Supported input voltages
range from 100-240V AC at 50-60Hz.
Understanding LED Indicators
The front panel LEDs provides instant status feedback, and, helps monitor and troubleshoot when
needed.
Led POWER
On
: When the Power LED lights on, the Switch is receiving power.
Off : When the Power turns off or the power cord has improper connection..