KROHNE TIDALFLUX 2300 F Ex EN - Manual (Page 6)

1
INTRODUCTION
6
TIDALFLUX 2300 F
www.krohne.com 6/2013 - 7312442200 - AD EX TIDALFLUX 2300 - en - R02
1.2 Safety instructions for the operator
These additional instructions are an extension to the handbook. All technical information as
described in the handbook is applicable, when not specifically excluded, completed or replaced
by the instructions in these additional instructions.
1.3 Approvals
The flowmeter system consists of a flow sensor and a signal converter. The approval numbers
are:
IFC 300 / PF:
• DEKRA 12 ATEX 0235 X
• IECEx DEK. 12.0079 X
TIDALFLUX 2000 :
• DEKRA 12 ATEX 0235 X
• IECEx DEK. 12.0079 X
EN/IEC 60 079
WARNING!
• Do not change the device. Unauthorised changes affect the explosion safety of the devices.
• The prescriptions and regulations as well as the electrical data described in the EC type
examination certificate must be obeyed.
• Beside the instructions for electrical installations in non-hazardous locations according to
the applicable national standard (equivalent to HD 384 or IEC 60364, e.g. VDE 0100),
especially the regulations in EN/IEC 60079-14 "Electrical installations in hazardous
locations", equivalent national standard (e.g. DIN VDE 0165 Part 1) or dust hazardous areas
such as EN 61241-14 must be complied with!
• Installation, establishment, utilisation and maintenance are only allowed to be executed by
personnel with an education in explosion safety!
INFORMATION!
All type examination certificates can be downloaded from the website.
EN/IEC number Description
EN 60 079-0: 2009
IEC 60 079-0: 2007
General requirements / Protection by enclosures
EN 60 079-1: 2007
IEC 60 079-1: 2007
Flameproof enclosure "d"
EN 60 079-5: 2007
IEC 60 079-5: 2007
Powder filling "q"
EN 60 079-7: 2007
IEC 60 079-7: 2006
Increased safety "e"
EN 60 079-11: 2012
IEC 60 079-11: 2006
IEC 60 079-11: 2011
Intrinsic safety "i"
EN 60 079-26: 2007
IEC 60 079-26: 2006
Equipment with equipment protection level Ga