KROHNE OPTIFLUX 6000 EN - Manual (Page 27)

TECHNICAL DATA
6
27
OPTIFLUX 6000
www.krohne.com 11/2013 - 4001723703 - HB OPTIFLUX 6000 R03 en
Operating conditions
Temperature Temperature Temperature Temperature
Process temperature Seperate flow sensor: -40...+140°C / -40...+284°F
Compact with IFC 300 converter: -40...+140°C / -40...+284°F
Compact with IFC 050 - IFC 100 converter: -40...+120°C / -40...+248°F
For detailed information refer to Temperatures on page 20.
For Ex versions different temperatures are valid.
Please check the relevant Ex documentation for details.
Ambient temperature -40...+65°C / -40...+149°F
Storage temperature -50...+70°C / -58...+158°F
Pressure Pressure Pressure Pressure
Ambient pressure Atmospheric
Nominal flange pressure For detailed information refer to Dimensions and weights on page 30.
Vacuum load 0 mbar / 0 psi
Chemical properties Chemical properties Chemical properties Chemical properties
Physical condition Electrical Conductive liquids
Electrical conductivity Standard: ≥ 1 μS/cm
Demineralized water: ≥ 20 μS/cm
Permissible gas content
(volume)
IFC 050: ≤ 3%
IFC 100: ≤ 3%
IFC 300: ≤ 5%
Permissible solid content
(volume)
IFC 050: ≤ 10%
IFC 100: ≤ 10%
IFC 300: ≤ 70%
Installation conditions
Installation Assure that the flow sensor is always fully filled.
For detailed information refer to Installation on page 11.
Flow direction Forward and reverse
Arrow on flow sensor indicates positive flow direction.
Inlet run ≥ 5 DN
Outlet run ≥ 2 DN
Dimensions and weights For detailed information refer to Dimensions and weights on page 30.