KROHNE ALTOFLUX IFM 6080 K EEx EN - Manual (Page 7)

7
6 Operation of the signal converter
The IFM 6080 K / i-EEx compact flowmeters are always equipped with magnet sensors. In that
way is possible to change the settings of the converter with aid of the magnet-bar without the
necessity to open the flameproof converter housing in the hazardous area.
For the program functions and settings of the converter the standard Installation and operating
instructions have to be consulted. It must be noted that - depending on the IFC090 i-EEx version
installed - not all output/input functions are available.
Following menus do not apply for versions Ex-i2 and Ex-i3:
(see also chapter 4.4 - page 4/5 - of the standard Installation and operating instructions of the
IFC090 K/F)
•
1.01
Æ
VALUE P
•
1.06 Output/input B1
•
1.07 Output/input B2
•
1.06 PULS B1
•
1.06 STATUS B1
•
1.07 STATUS B2
•
1.06 CONTROL B1
•
1.07 CONTROL B2
•
3.02
Æ
VALUE P
•
3.07 HARDWARE
Fct. Text Description and settings
1.00 OPERATION Operations menu
1.01 FULL SCALE ...
Æ
VALUE P
1.06 Output/Input B1
1.07 Output/Input B2
1.06 PULS B1
1.06
1.07 STATUS B1
STATUS B2
1.06
1.07 CONTROL B1
CONTROL B2
3.00 INSTALL. Installation menu
3.02 FLOWMETER ...
Æ
VALUE P
3.07 HARDWARE
As a consequence, the chapters included in the standard Installations and operating instructions,
giving detailed descriptions of these menus, must be skipped.