KROHNE OPTIBAR PM 5060 C Ex d ia EN - Manual (Page 5)

DEVICE DESCRIPTION
2
5
OPTIBAR 5060
www.krohne.com 07/2014 - 4003592001 - AD OPTIBAR 5060 Exd ia R01en
Device description
2.1 Device description
The pressure transmitter of the OPTIBAR 5060 series is designed to measure the pressure of
vaporous, gaseous and liquid media. The pressure transmitters are supplied as standard with 2-
wire, 4...20 mA signal outputs.
2.2 Marking
2.2.1 Marking for ATEX
The marking of the entire device is on the housing, where the following identification plate can be
found.
Figure 2-1: Example for an ATEX nameplate for a OPTIBAR 5060
1 Observe the installation and operating instructions
2 Marking of notified body and CE marking
3 Hardware and Software version
4 Product name and type code
5 Nominal range
Permissible process pressure
6 Permissible temperature range
7 Electronics power supply and signal output
8 Ingress protection and material of wetted parts
(Diaphragm, process connections, gasket and fill fluid)
9 Approvals and approval directive
.book Page 5 Monday, July 7, 2014 3:31 PM