KROHNE TTP 400 EN - Manual (Page 8)

8 Installation and Operating Instructions TTP x00
4 Technical data
4.1 Technical data
Connection head Stainless steel V2A 1.4305
Cable gland M16 (only TTP 200/400)
Electrical connection
M12 connector
Type of protection IP 67
Ambient temperature –20...+60 °C
Threaded socket G1/2“h; V4A 1.4571
Threaded socket M12h; V4A 1.4571
Push-in connection via protective tube dia. 6 mm
Process connections
Threaded socket G1/2; V4A 1.4571
Protective tube Dia. 6 mm x 1 mm; V4A 1.4571
Positioned lengths (mm) 20, 50, 100, 150, 250 (others on request)
Sensor element Pt100 DIN EN 60751 Cl. A (dual type also possible)
Response time t90 Dia. 6 mm: 7 s; dia. 4 mm: 6 s; dia. 3 mm: 1.5 s
Process temperature range –20...+170 °C
Operating pressure Max. 16 bar
With direct Pt100 connection
Output
Screw terminals for 2-, 3-, 4-wire connection
With integrated head transmitter
Supply voltage
8...28 V DC (from current loop)
Output 4...20 mA
Accuracy ± 0.1% of full-scale range