KROHNE OPTISWITCH 3300C NAMUR EN - Manual (Page 9)

On the electronics module you will find the following indicating
and adjustment elements:
l
signal lamp for indication of the switching condition (yellow)
l
potentiometer for adaptation to the product density
l
Mode switch to select the switching condition (reverse
characteristics)
l
Simulation key
3.4 Storage and transport
Your instrument was protected by packaging during transport.
Its capacity to handle normal loads during transport is assured
by a test according to DIN 55439.
The packaging of standard instruments consists of environ-
ment-friendly, recyclable cardboard. In addition, the sensor is
provided with a protective cover of cardboard. For special
versions PE foam or PE foil is also used. Dispose of the
packaging material via specialised recycling companies.
l
Storage and transport temperature see "Supplement -
Technical data - Ambient conditions"
l
Relative humidity 20 … 85 %
Packaging
Storage and transport tem-
perature
OPTISWITCH 3300 C - with NAMUR output 9
Product description
31358
-EN
-060830