KROHNE OPTISWITCH 3200C 2wire EN - Manual (Page 9)

On the electronics module you will find the following indicating
and adjustment elements:
l
signal lamp for indication of the switching condition (green/
red)
l
potentiometer for adaptation to the product density
l
mode switch for selection of the output current
3.4 Storage and transport
Your instrument was protected by packaging during transport.
Its capacity to handle normal loads during transport is assured
by a test according to DIN 55439.
The packaging of standard instruments consists of environ-
ment-friendly, recyclable cardboard. In addition, the sensor is
provided with a protective cover of cardboard. For special
versions PE foam or PE foil is also used. Dispose of the
packaging material via specialised recycling companies.
l
Storage and transport temperature see "Supplement -
Technical data - Ambient conditions"
l
Relative humidity 20 … 85 %
Packaging
Storage and transport tem-
perature
OPTISWITCH 3200 C - with two-wire output 9
Product description
29959
-EN
-060830